10.33C
BACKHOE LOADER
4 WHEEL STEERING
DIESEL ENGINE
Features: 4-cylinder in-line, turbocharged, charge air cooling, common Rail injection system electronically controlled, external exhaust gas recirculation, water-cooled, dry filtration, oxidation catalyst (DOC) Emissioned according to CEE 97/68 -Tier 4i.
| Type | Deutz TCD 3.6 L4 |
|---|---|
| Max Power | 78 kW - 106 HP |
| Rated rpm | 2,300 |
| Power ISO/TR 14396 | 74,4 kW - 101 HP |
| Power EEC/80/1269 | 74,4 kW - 101 HP |
| Max torque | 302 ft. lb. |
| Bore | 3.86 in. |
| Stroke | 4.72 in. |
| Displacement | 221 in³ |
ELECTRIC SYSTEM
| Battery | 12 Volt |
|---|---|
| Capacity EN 60095-1 | 110 Ah - 1100 A |
| Alternator rating | 95 A |
| Reverse warning | Standard |
| Wiring according with | IP 67 DIN 40050 |
TRANSMISSION
Hydrostatic transmission with automatic power regulation and closed circuit with variable displacement pump and motor. Gearbox with 2 mechanical selections: 2 work speeds (fwd/rev) and 2 road speeds (fwd/rev).
Work speed:
| Forward | 1st gear 0÷4 mph | 2nd gear 0÷8 mph (automatic selection) |
|---|---|---|
| Reverse | 1st gear 0÷4 mph | 2nd gear 0÷8 mph (automatic selection) |
Road speed:
| Forward | 1st gear 0÷11 mph | 2nd gear 0÷11 mph (automatic selection) |
|---|---|---|
| Reverse | 1st gear 0÷25 mph | 2nd gear 0÷8 mph (automatic selection) |
AXLES
Designed for Heavy Duty. All-wheel drive. Planetary final drives in each wheel. Front axle: steering and oscillating up to a total angle of 20° Rear axle: steering and fixed to the frame
BRAKE SYSTEM
Service: multi-disc oil brakes on all wheels.
Parking: mechanical brake operating on the service brake, manually actuated.
TIRES
| Standard | 405/70 R 24 |
|---|---|
| Option | 15.5 R25 • 17.5 L 24 |
STEERING
Servo-assisted through hydraulic steering:
- on front wheels for road transport
- on each wheel inside the working site, where the maximum maneuverability in reduced spaces is required
- on each wheel for crab steering inside the working site for side displacement
| Inner tires turning radius | ft in 7’2.61” |
|---|---|
| Outer tires turning radius | ft in 15’5.04” |
| Outer bucket turning radius | ft in 18’4.47” |
HYDRAULIC SYSTEM
Composed of two gear pumps, the first for the loader circuit and steering, the second for the circuit of the fan, having a double speed of rotation. Modular two-element control valve for the loader, modular six-element control valve for the backhoe regenerative type, with unloading valve for reducing consumption during transfer.
Double acting hydraulic cylinder. Cylinder 1st backhoe arm with brake at maximum height. Hydraulic oil cooling radiator. Full-flow oil filter on the leakage pipe.
| Max flow | 34.34 GPM |
|---|---|
| Loader relief valve pressure | 3,046 psi |
| Steering relief valve pressure | 2,538 psi |
| Lift cylinder | 3.54 x 26.18 in. |
| Bucket cylinder | 4.33x17.52 in. |
Loader control
Single lever arm-control with 4-position lifting system and with 3-position bucket system.
Backhoe control
Two levers backhoe control, “cloche” type.
Two hydraulic-control independent stabilizers.
Side translation with four hydraulic locking devices.
SERVICE CAPACITIES
| Engine | 2.11 gal. |
|---|---|
| Front-axle | 2.85 gal. |
| Rear-axle | 2.85 gal. |
| Gearbox | 0.42 gal. |
| Hydraulic circuit | 29.06 gal. |
| Brake system | 0.24 gal. |
| Fuel | 29.06 gal. |
| Water cooling | 6.34 gal. |
10.33C TECHNICAL FEATURES
Loader
| Standard bucket capacity | 1,57 yd3 |
|---|---|
| Bucket width | 7’8.52” ft. in. |
| Breakout force | 20,062 lbs |
Backhoe loader
| Type | 4.45C VF |
|---|---|
| Standard bucket capacity | 42.27 gal. |
| Bucket width | 19.69” in. |
| Dipperstick max penetration capacity | 9,811 lbs |
| Max breakout force on the bucket type | 12,125 lbs |
| Lifting capacity on the bucket pin-up to max-height | 3,307 lbs |
| Rotating | 180° |
| A - Max digging depth | 15’8.98” ft. in. |
| B - Standard digging depth | 14’5.23” ft. in. |
| C - Max digging depth with telescopic (opt.) | 19’0.35” ft. in. |
| D - Standard digging depth with telescopic (opt) | 17’8.6” ft. in. |
DIMENSIONS AND WEIGHT
| Max length in transfer position | 19’8.22” ft. in. |
|---|---|
| Max width in transfer position | 7’8.52” ft. in. |
| Width across tire | 7’6.16” ft. in. |
| Tracks width | 6’2.41” ft. in. |
| Ground clearance | 17.72” in. |
| Standard weight in running order | 18,078 lbs |
| Max permissible weight | 20,723 lbs |
Loading bucket (lbs)
| Static tipping load | 12,346 lbs |
|---|---|
| Payload (50%) | 6,173 lbs |
Loading fork (lbs) - Centre of gravity 19,69”
| Static tipping load | 10,141 lbs |
|---|---|
| Payload EN 474-3 (80%) | 8,157 lbs |
| Payload EN 474-3 (60%) | 5,952 lbs |
| Payload DIN 24094 (50%) | 5,071 lbs |
Venieri 10.33C Backhoe Loader Specifications & Technical Data Download
Have Questions on The Venieri 10.33C Backhoe Loader?
VF10.33C Brochure