The VF5.63C Wheel Loader boasts a 72-hp four-cylinder in-line engine, a Hydrostatic transmission with automatic power regulation, Self-locking limited-slip differential on its front axle, and a max. permissible weight of 13,669 lbs.
New completely redesigned linkage to the latest state of the art, for maximum break-out force and interchangeability with previous versions.
SAFETY IS OUR PRIORITY
The negative parking brake is integrated into the front axle for maximum safety in all operative conditions (optional on 4.63H).
Thanks to the new sound proof technology and special “anti vibration” rubber shock absorbers it was possible to reach a deeply noise reduction inside cabin, for maximum comfort for the operator.
The new cabin design guarantees 360° visibility, for complete working con-trol on each attachment installed granted the best safety condition ever. Cabin level II ROPS/FOPS.
The brand new ventilation system grants an high level of operator comfort. With VENIERI CLIMATRONIC or thanks to new technological Air-condition you can find the perfect Enviroment inside your cabin.
100% VENIERI DESIGN
In the new machines our Venieri Design Lab follows the “family feelings” but introduces significant stylistic innovations.
Oscillating rear axle fixed to the frame with maintenance-free supports.
ALWAYS CLEAN AIR
The new air cleaner system offers a two stage filtration, through high efficiency primary filters and safety filters, that could be integrate with cyclon pre-filter (optional on 4.63H) for maximum engine protection.
TIER IVf ENGINE
The new Yanmar and Deutz engines complies with the latest emission standards delivering high torque at low rpm.
DOUBLE ATTENTION FOR FUEL SAVING
The new electrically controlled dual speed cooling fan, adjusts the rotation speed according to the working conditions, reducing fuel consumption and noise.
BUILT FOR POWER DESIGNED FOR AGILITY
The special layout of the counterweight grants perfect maneuverability, maximum drive angle and protection of the integrated rear lights in narrow spaces.
Have Questions on VF5.63C Wheel Loader?
4 cylinder inline, turbocharged, common-rail injection with electronic control, exhaust gas recirculation, water-cooled, dry filtration, oxidation catalyst (DOC). Emissions according to CE 97/68 - TIER IVf.
|Type||Deutz TD 2.9 L4|
|Max. power||58 kW - 79 HP|
|Power ISO/TR 14396||55,4 kW - 75 HP|
|Power EEC 80/1269||55,4 kW - 75 HP|
|Economic working range rpm||1400 - 1800 RPM|
|Max. torque||260 ft lbf|
|Capacity EN 60095-1||110 AH- 850 A|
|Alternator rating||95 A|
|Wiring according to rules||.IP 67 - DIN 40050|
Hydrostatic transmission with automatic power regulation and a closed circuit with pumps and variable displacement engine. Gearbox with 2 mechanical selections: 2 work speeds (fwd/rev) and 2 road speeds (fwd/rev).
|1st gear mph||0+2||0+2|
|2nd gear mph||0+7||0+7|
|1st gear mph||0+9||0+9|
|2nd gear mph||0+25*||0+25*|
* Self-limited max. speed
Two heavy-duty equal size axles with planetary final drives in each wheel. Fixed rigid drive axle. Oscillation rear axle on rear chassis section up to a total angle of 25°. Transfer gearbox transferring movement directly to the rear and to the front axle via transmission shaft. Self-locking limited-slip differential on the front axle. Self-locking limited-slip differential on the rear axle (optional).
Service: hydraulic multi-disc oil brake on the front and rear axles. Parking brake: negative hydraulic on the front axle, electrically applied.
|Optional||455/70 R20 • 14.5 x 20|
Servo-assisted steering LOAD SENSING system.
|Total steering angle||80°|
|Inner tires turning radius||8’5.77” ft. in.|
|External tires turning radius||14’9.76” ft. in.|
|External bucket turning radius||16’4.06" ft. in.|
Two gear pump, the first for loader and steering circuit with LOAD SENSING valve, the second for the fan circuit with two rotating speed. Modular two-element control valve with main relief valve. Double acting hydraulic cylinders.
Hydraulic oil cooling radiator. Full flow oil filter on return line. Single servo lever arm control with 4 position lifting system and with 3 position bucket system.
|Max flow||23.78 GPM|
|Max. flow with high flow (optional)||30.38 GPM|
|Loader relief valve pressure||3,336 psi|
|Steering relief valve pressure||2,756 psi|
|Lift cylinder||3.35in. x 22.83in.|
|Bucket cylinder||3.54in. x 15.83in.|
|Lifting time (full)||4.38 sec.|
|Lowering Time (empty)||3.41 sec.|
|Unloading Time||1.9 sec.|
|Total cycle time||9.69 sec.|
|Front axle||1.37 gal.|
|Gear Box||.48 gal.|
|Hydraulic circuit||18.49 gal.|
|Brake system||.53 gal.|
|Water cooling||3.96 gal.|
|Standard bucket capacity||1,44 yd3|
|Bucket width||6’10.68” ft. in.|
|Straight static tipping load||10,913 lbs|
|Full turned tipping load||9,700 lbs|
|Lifting capacity at max. height||9,149 lbs|
|Hinge pin height||11’0.28” ft. in.|
|Dump height at 40°||2’1.98” ft. in.|
|Reach at 40°||660” ft. in.|
|Breakout force||14,110 lbs|
DIMENSIONS AND WEIGHT
|Max length in transfer position||17’4.46” ft. in.|
|Max width in transfer position||6’10.68” ft. in.|
|Tire external width||6’4.26” ft. in.|
|Track width||5’0.24” ft. in.|
|Wheelbase||7’5.57” ft. in.|
|Ground clearance||12.99 in.|
|Max. height||9’0.66” ft. in.|
|Standard operating weight||12,787 lbs|
|Max permissible weight||13,823 lbs|
|Noise level inside cabin ISO 6396 - LpA||75 dB(A)|
|Exterior noise level ISO 6395 - LwA||99 dB(A)|