Increase your expectations: Venieri’s small ones are here!
Thanks to the widely tested project evolution matching the new market requirements, the new machines represent a significant improvement. Production is located in the “Motor Valley” which, in a small territory, has always been giving birth to fabulous cars and top-performing motorbikes!
The genetic heritage is very rich: the Japanese technology of the Yanmar engines, new Bosch Rexroth transmissions, and a ratio traction/weight never before achieved.
The ORA (oscillating rear axle) is one of the main organs in this series: there isn’t any oscillating mechanical coupling between the front and rear, ensuring smart working and driving safety on these small ones which can be normally found on big machines only.
The 4 TNV 88 and 84T Yanmar engines are designed to match all types of requirements: low environmental impact, low noise, and limited vibration transform these engines perfect partners. The continuous efforts to find sustainable solutions to essential needs of human life make Yanmar engines the best in terms of power economy and emissions; simplicity and reliability are the two main features that brought Venieri to choose Yanmar engines.
There are many ways to transmit power but only one is able to satisfy even the most demanding customers: Venieri and Bosch-Rexroth laboratories have studied and developed one of the best possible combinations of high-pressure transmission (so high-efficiency transmission with 7,252 psi). In that way the efficiency of Venieri’s wheel loaders led to an 11% improvement: try and you’ll believe it!
The double fixing on each side grants extreme reliability and stiffness to the chassis even after 8000/10000 working hours and represents a further confirmation of our design philosophy: small size machines equally designed as the big ones! The 18° rear oscillation grants perfect stability and security during working and transfer operations. Electrically driven 100% blocking slip differential.
Maintenance is fundamental on all machines: Venieri decided to build machines easy and accessible to anyone: machines whose maintenance operations can be carried out in an easy and safe way, thanks to its particular design. For example, the 3 points of centralized greasing allow the rear axle and the swinging to be instantly double-checked.
4 cylinders, direct injection, water-cooled, paper dry filter. Emissions in accordance with EC 97/68 Tier III rules.
|Max Power||36kW - 50 HP|
|Power ISO/TR 14396||35 kW - 48 HP|
|Power EEC/80/1269||35 kW - 48 HP|
|Capacity EN 60095-1||80 AH- 770 A|
|Alternator rating||65 A|
|Wiring according to rules||.IP 67 e DIN 40050|
Hydrostatic transmission with automatic power regulation and a closed circuit with a variable-displacement pump and engine. Two forward/reverse speeds with single-lever control.
|Forward||1st Gear mph 0+4||2nd Gear mph 0+12|
|Reverse||1st Gear mph 0+4||2nd Gear mph 0+12|
All-wheel drive. Two heavy-duty axles with planetary final drives on each wheel.
Fixed rigid drive axle on front chassis section. Oscillating drive axle on rear chassis section up to a 20° total angle.
Transfer gearbox allowing the rear and the front movement by means of a transmission shaft.
Self-locking limited-slip differential on front axle (optional on rear axle).
Service: drum-brake hydraulically operating on front axle working on all wheels. Parking brake: mechanical drum-brake operating on service brake, manually activated.
|Optional||10.5-18 10pr • 12.5-18 10pr • 15.5/55 R18|
Servo assisted hydraulic steering with LOAD SENSING system.
|Total steering angle||80°|
|Inner tyres turning radius||7’2.34” ft. in.|
|External tyres turning radius||12’5.21” ft. in.|
|External bucket turning radius||13’9.75” ft. in.|
Hydraulic gear pump with LOAD SENSING priority valve for steering circuit. 2-section modular control valve with main relief valve. Double-acting hydraulic cylinders. Hydraulic oil cooling radiator. Full-flow oil filter on the return circuit. Single control cloche-lever with 4-position bucket lifting system and 3-position auxiliary control system.
|Max flow||15.85 GMP|
|Loader relief valve pressure||2,900.75 psi|
|Steering relief valve pressure||2,755.72 psi|
|Lift cylinder||2.76in. x36.89in.|
|Bucket cylinder||3.15in. x15.55in.|
|Front axle||1.53 gal.|
|Rear-axle + gearbox||1.72 gal.|
|Hydraulic circuit||15.06 gal.|
|Brake system||0.29 gal.|
|Water cooling||2.64 gal.|
|Standard bucket capacity||yd3 0.92|
|Bucket width||5’6.93” ft. in.|
|Straight static tipping load||6,614 lbs|
|Full turned 40° tipping load||5,952 lbs|
|Lifting capacity at max. height||5,952 lbs|
|Dump clearance||10’2.05” ft. in.|
|Dump height at 43°||8’0.46” ft. in.|
|Reach at 43°||2’1.59” ft. in.|
|Breakout force||10,362 lbs|
DIMENSIONS AND WEIGHT
|Max length in transfer position||15’8.98” ft. in.|
|Max width in transfer position||5’6.93” ft. in.|
|Max height||8’0.85” ft. in.|
|Track width||4’3.97” ft. in.|
|Overall tire width||5’4.57” ft. in.|
|Wheelbase||6’4.77” ft. in.|
|Ground clearance||14.57” in.|
|Standard operating weight||9,149 lbs|
|Max permissible weight||10,582 lbs|
|PERFORMANCE DATA||UNIVERSAL BUCKET||MULTI-PURPOSE BUCKET||OVERSIZE||FORKS|
|Full load bucket capacity (SAE)||.98 yd³||0.78 yd³||1.57 yd³||/|
|Bucket width||5’6.93” ft. in.||5’6.93” ft. in.||6’2.8” ft. in.||/|
|Bucket weight||551 lbs||551 lbs||772 lbs||/|
|Max operative height||12’5.61” ft. in.||12’3.64” ft. in.||12’7.57” ft. in.||/|
|Forks length (Standard)||/||/||/||3’3.37” ft. in.|
|Forks length (Optional)||/||/||/||3’11.24” ft. in.|
|Height to hinge pin||10’2.05” ft. in.||10’2.05” ft. in.||10’2.05” ft. in.||/|
|Dump height||8’0.46” ft. in.||8’2.43” ft. in.||7’10.49” ft. in.||/|
|Reach fully raised||2’1.59” ft. in.||1’11.62” ft. in.||2’3.56” ft. in.||/|
|Max dump distance||4’9.09” ft. in.||4’7.12” ft. in.||4’11.06” ft. in.||/|
|Bucket static tipping load, straight||6,614 lbs||6,393 lbs||5,952 lbs||/|
|Bucket static tipping load, full turn (40°)||5,952 lbs||5,732 lbs||5,291 lbs||/|
|Forks static tipping load, full turn (40°)||/||/||/||4,850 lbs|
|Forks Payload EN 474-3 (80%)||/||/||/||3,880 lbs|
|Forks Payload EN 474-3 (60%)||/||/||/||3,086 lbs|
|Breakout force||10,362 lbs||11,244 lbs||9,700 lbs||/|
|Total length||15’8.98” ft. in.||15’7.01” ft. in.||15’8.98” ft. in.||/|
|External bucket turning radius||13’9.35” ft. in.||13’1.48” ft. in.||14’1.29” ft. in.||/|
|Standard operative weight||9,149 lbs||9,259 lbs||9,259 lbs||/|