FARESIN 6.26 FULL ELECTRIC TELEHANDLER
5,732 LBS OF MAXIMUM CAPACITY, UP TO A HEIGHT OF 19.4'
Faresin Industries, after years of research, has developed this innovative electric machine which has the same framework as the telescopic handler 6.26 without the noise of an engine! The fact that it has zero CO2 emissions, allows for it to be used even in closed environments such as warehouses, logistics areas and agricultural activities. This improves the level of comfort and safety in the workplace. The low noise level allows for it to be used in workplaces and environments where the use of combustion engines are not recommended.
These technical solutions are perfectly in line with new green technology and provides a reduced impact on the environment for the future. The telescopic handler Full Electric 6.26 can be used in any operating condition thanks to its practicality and its all-wheel drive.
Contact Us!
FEATURES
- Lithium-Ion Battery Life: Up to 6 hours
- Recharge: On board 13 hours / Fast 2.5 hours
- 3 Types of Recharging- Unit comes with the standard on-board charger placed inside the machine. It is recommended to use the classic standard charging method at night. Add-on the optional on board internal fast charger or the external fast charge for faster charging and reduce the recharge time during the work cycle.
- Reduced Noise-The same performance as a conventional telescopic handler mod. 6.26 without the noise of a combustion engine.
- Green Technology-Thanks to its services and electric drive unit, the CO2 emissions can be considered zero.
- 100% Electric-Simple and cheap maintenance like that of an electric motor.
- Classic standard charging is easy in two simple steps- find the charging port and plug the cord into a standard 110v outlet!
Width 6.2'
|
Length 13.2'
|
Horizontal Boom Extension 10.5'
|
Height 6.35'
|
Cab Width 3.1'
|
Tilting Angle 155 Degrees
|
Clearance From Ground 8.6"
|
Maximum Capacity 5732 lbs.
|
Accessories Holder FH
|
Pitch 8.3'
|
Lifting Height 19.4'
|
Gauge 5'
|
Weight = 10,582 lbs.
|
---|
Transmission = Electric
|
Hydraulic supply = Gear pump
|
Flow rate of hydraulic services = 21.1 gal/min @ 3,335 psi
|
Steering radius = 10.7 ft
|
Number of extending sections = 1
|
Speed = 7.5 mph
|
OPERATING COSTS -60%
*The increased purchase investment is amortized on average after about 2 years of work.
Check out more questions on this model here!
3 units in stock!!!!

