Skip to main content
Ranko Equipment LLC
Main Content

Faresin Telehandler 6.26 Full Electric

Faresin Telehandler 6.26 Full Electric
Description
Description

FARESIN 6.26 FULL ELECTRIC TELEHANDLER

5,732 LBS OF MAXIMUM CAPACITY, UP TO A HEIGHT OF 19.4'

Faresin Industries, after years of research, has developed this innovative electric machine which has the same framework as the telescopic handler 6.26 without the noise of an engine! The fact that it has zero CO2 emissions, allows for it to be used even in closed environments such as warehouses, logistics areas and agricultural activities. This improves the level of comfort and safety in the workplace. The low noise level allows for it to be used in workplaces and environments where the use of combustion engines are not recommended. 

These technical solutions are perfectly in line with new green technology and provides a reduced impact on the environment for the future. The telescopic handler Full Electric 6.26 can be used in any operating condition thanks to its practicality and its all-wheel drive.

elettrico 1.png  

FEATURES

  • Battery Life: 6 hours

  • Recharge: On board 13 hours / Fast 2.5 hours

  • 3 Types of Recharging- Use Fast charging and reduce the recharge time during the work cycle. Use classic charging at night. Standard on-board charger placed inside the machine.

  • Reduced Noise-The same performance as a conventional telescopic handler mod. 6.26 without the noise of a combustion engine.

  • Green Technology-Thanks to its services and electric drive unit, the CO2 emissions can be considered zero.

  • 100% Electric-Simple and cheap maintenance like that of an electric motor.

 

  DATA & TECHNICAL SPECIFICATIONS

Width 6.2'
Length 13.2'
Horizontal Boom Extension 10.5'
Height 6.35'
Cab Width 3.1'
Tilting Angle 155 Degrees
Clearance From Ground 8.6"
Maximum Capacity         5732 lbs.
Accessories Holder FH
Pitch 8.3'
Lifting Height 19.4'
 
Gauge 5'

6.26 FULL ELECTRIC

Weight = 10,582 lbs.
Transmission = Electric
Hydraulic supply = Gear pump
Flow rate of hydraulic services = 21.1 gal/min @ 3,335 psi
Steering radius = 10.7 ft
Number of extending sections = 1
Speed = 7.5 mph

 

 

OPERATING COSTS -60%

Schermata 2019-04-09 alle 15.20.07.png

*The increased purchase investment is amortized on average after about 2 years of work.

 

Document Icon Electric Telehandler Brochure 6.26
8 pages, File Size: 2.07 MB
© 2021 Ranko Equipment LLC. All rights reserved