Description
Easy Servicing
The Hitch Options and The Running Gears
Film Wrapping Unit
Description
Comprima Round Baler
- The all-rounder for any type of crops
- Select from 3 different press connector systems
- 7 different model configurations to choose from
- 3 chamber options: Fixed, Semi-variable, and Fully variable for baling all bale sizes
- Also available as a combination bale wrapper (shown above in photos- model CV150XC)
- NovoGrip slat and belt conveyor, the turning and compaction system for all crops
- Camless EasyFlow pick-up with w-lined tines
- Available with feed rotor or cutting system (17 or 26 blades)
- High throughputs from a massive cut-and-feed rotor
- Available with net wrap or peripheral film wrap system
- Easy and fast servicing
INTRODUCING THE COMPRIMA VARIABLE BALE CHAMBER WITH BALE WRAPPER CV150XC!
The Comprima CV 150 XC has a powerful double wrapper. The wrapping table forms a deep cradle and has large guide rollers on the sides to ensure the bale is consistently rolled during the wrapping process even when the conditions are more than difficult. The Comprima CV 150 XC table can also be used for unloading the bales in pairs when no wrapping takes place.
The variable bale chamber on the Comprima V and CV models produces steplessly adjustable bale diameters of 1.00 m to 1.50 m or 1.80m. The actual bale size and the baling pressure are adjusted on the operator terminal. This way, you can adjust the density easily and conveniently to the conditions at hand.
Once the bale is wrapped in the net, the tailgate of the baler opens. At the same time, the wrapping table inclines backwards, unloading the second already film-wrapped bale on the ground via a rubber rack. Now, the front bale is pushed from the transfer table onto the wrapping table by sturdy conveyor bars guided by chains on the right and left sides. As the baler resumes baling, the wrapper starts the wrapping process.
The variable bale chamber is made up of two slat and belt conveyors. These form the bale as it grows to its preset diameter. Combined with springs and hydraulic cylinders, the double rocker in front and the tensioning arm in the rear generate a baling pressure which increases progressively as the bale diameter is growing. This technology produces an exceptionally high density.
1 CF150XC Comprima Baler in stock!!
Contact Us!
Comprima Brochure
36 pages, File Size: 10.87 MB
Easy Servicing
Easy Servicing
- Efficient – Best accessibility for easy maintenance
- Automatic lubrication - one lubricator attends to all chains
- Time-saving – Central lubrication manifolds
- Safe – Automatic chain tension
Designed for premium bale productivity and density, the Comprima also convinces by its uncluttered design and exemplary accessibility. These features make it particularly easy to service. Grease banks and the automatic chain lubrication system reduce the time that is required for service and maintenance to a minimum.
The large diameter of the gearwheels ensures particularly gentle deflection of the drive chain. This in combination with the automatic chain tensioner leads to a significant reduction of wear and thus to time and cost savings.
A central chain lubrication system with eccentric pump and large reservoir (7 l) reduce the time that is required for service and maintenance. It further enhances the functional safety and economic efficiency of the Comprima. The desired oil feed rate is set at the pump.
All grease points are grouped into easy-access grease banks, saving time and increasing the operator comfort.
For utmost reliability, the hydraulic system on Comprima V, CF and CV is protected by an oil filter with a clogging indicator.
The Hitch Options and The Running Gears
The Hitch Options and The Running Gears
- Variable - hitch ring or ball attachment
- More options - single or tandem axle
- Three options - the tyre sizes
Every day, a Comprima has to deal with fast road travel, uneven ground, yielding grounds, and maneuvring in narrow spaces. KRONE Comprima models come with an air brake and various tire options. Perfectly specified to meet all customer requirements, they are available with two different hitch systems, a single or tandem axle.
Comprima has a standard 40 mm hitch ring for bottom- or top-mount attachment. A notch system adjusts the drawbar quickly to the required attachment height. In addition to this, there is a choice of three further hitch options that meet specific needs in specific countries. As an alternative, the Comprima can also be equipped with a ball-head attachment 80 in the bottom hitching. This warrants smoothest rides, better maneuvrability and minimum wear.
A compressed air brake system is standard specification on both the single axle and tandem axle models. Machines for export can also be equipped with hydraulic brakes.
Only the Comprima F und V models have the single axle. KRONE offers three different flotation tire sizes for this axle that range from 15.0/55-17 to 600/50 R 22.5.
A tandem axle is standard specification on the CF and CV combination baler and wrappers and an option on the F and V models. Tandem axles offer greater tongue loads, smoother rides and better road stability than a single axle. As they offer a larger contact area, they also reduce rutting and protect the soil. There are also three different tyre sizes from 15.0/55-17 10 PR to 500/55-20 available for this axle assembly.
Film Wrapping Unit
Film Wrapping Unit
- Fast – Due to the powerful double wrapper
- Functional – Safe bale drive on the bale table
- Clean film cuts - by controlled blades
- Safe – Wide overlapping of the wrap layers
The Comprima wrapper wraps the bales fast and reliably – even in difficult conditions and in sloping fields.
The table on the Comprima wrapper forms a deep cradle and has big bobbins on either side that fix the faces of the bale as it is being rolled – an ideal setup for dependable operation in sloping fields.
The wrapper takes 75 cm and 50 cm wide film material. The individual film width is set very easily and the number of wraps (4, 6, 8 or 10) is selected on the operating terminal. No matter which film width you choose, the layers overlap generously. Due to touchless sensors, the integrated film tear detection is particularly reliable.
There are two large storage compartments on either side of the machine which store up 10 spare film rolls, protected from moisture and dust. Optionally, they can be equipped with powerful LED lighting. The film roll holders roll holders fold down for convenient removal and refills.
The bale cloth is standard specification and protects the film from damage as the bale is placed on the ground. The optional bale turner gently tips the bales on their front. It does not need to be removed it is not required: simply fold it away close to the wrapping table.
If not used for wrapping, the table can be used for depositing the bales in pairs, which leads to great time savings in clearing the field.