Posted on 10/07/2020 at 01:39 PM by Angie Deever
Experience Extreme Power and Maximum Flexibility with the VF18.63B Wheel Loader
The articulated VF18.63B boasts a 228-hp four-cylinder Deutz engine, hydrostatic transmission, rear oscillating axle, and a lift capacity of 28,374 pounds
Easiest maintenance and service - ELECTRICAL OPENING OF ENGINE BONNET CENTRALIZED GREASING SYSTEM EASY MAINTENANCE OSCILLATING ZF REAR AXLE MAINTENANCE PROGRAM “VENIERI FOR LIFE”
“Z” LINKAGE NEW DEUTZ ENGINE 6 CYLINDERS TURBO INTERCOOLER NEGATIVE HYDRAULIC PARKING BRAKE MULTIPURPOSE JOYSTICK ERGONOMIC AND PNEUMATIC SEAT RESPECT FOR THE ENVIROMENT AND LOW CONSUMPTION ZF AXLES BOSCH REXROTH HIGH EFFICIENCY HYDROSTATIC TRANSMISSION 3+3 AUTOMATIC GEAR SHIFT 25 MPH MAX SPEED 69DB. WORK HARD, IN SILENCE. LET THE SUCCESS MAKE THE NOISE. FAN ROTATION CONTROLLED WITH TEMPERATURE SENSOR DESCENT REGULATION VALVE
Main Features:
- Maximum Weight: 48,500 lbs.
- Maximum Operating Height: 11’1″
- Lift Capacity: 28,374 lbs.
- Static Tipping Load-Full Turn: 30,400 lbs.
- Breakout Force: 34,400 lbs.
Specifications:
- Deutz 6 cylinder/228 Hp
- Maximum Speed: 25 mph
- Hydraulic Flow: 63 GPM
- Transmission: Hydrostatic
- Rear Oscillating Axle
- Kinematics: “Z”
- Dimensions: 26’2′ x 9’6′ x 11’1′
- Turning Radius: 22’7″
- Ground Clearance: 20′ 7″
- Max. Bucket Capacities.: 4.5 – 6.5 cu/yd
- Bucket Width (Standard): 9’6″
- Height to Hinge Pin: 13’9″
- Dump Angle: 43°
- Dump Height: 10’3″
- Dump Clearance: 13’9″
- 4-Wheel Drive
Standard Equipment:
- Acoustic warnings
- Plugs with keys for fuel and hydraulic tanks
- Bucket with welded teeth
- ROPS-FOPS- cab with heater, pressurizer circulating fan, with front and rear windscreen wiper and windshield washer
- Toolbox
- Spare parts catalogue
- Seat belt
- Limited slip differential on front and rear axle
- Safety clamp for lifting cylinders
- Negative hydraulic parking brake
- Electrical index for bucket position
- Working lights
- Draw bar hook
- Soundproofing
- Yellow rotating and overturning beacon
- Operation and maintenance manual
- Type-approval for road traffic
- Side rearview mirrors
- Complete instrument board
- Electrical opening of the engine cover
Optional Equipment:
- Hydraulic or mechanical quick coupler
- Cement mixing bucket
- Multipurpose bucket (4 in 1)
- Speed reduction kit
- Lifting forks
- Asphalt and cement planer
- Snow blower
- “V” type snow blade
- Angle-tilt dozer blade
- Hand operating hammer
- Polishing brush
- Trencher wheel
ELECTRIC SYSTEM
Battery 12 Volt
Capacity EN 60095-1 180 Ah - 1.100 A
Alternator rating 150 A Reverse warning
Standard Wiring according to IP 67 e DIN 40050
TRANSMISSION
Hydrostatic transmission with automatic power regulation and closed circuit with variable displacement pumps and two motors. Three forward/reverse speed with fully automatic gear shift and single-lever control. Gear box with automatic gears and clutch to disconnect one motor in travelling speed. forward reverse 1st Gear mph 0÷5 0÷5 2nd Gear mph 0÷14 0÷14 3rd Gear mph 0÷25 0÷25 AXLES Two heavy duty ZF axles with planetary final drivers in each wheel. Rigid drive axle on front chassis section. Oscillation drive axle on rear chassis section up to a total angle of 20°. Transfer gear box transferring movement directly to the rear and to the front axle via a transmission shaft. Self-locking limited slip differential on front and rear axle. BRAKES Service: hydraulic multi-disc oil brake on each wheel. Parking: hydraulic negative disc brake actuated by electric control and automatically when the machine is turned off.
TIRES
Standard 23.5 R25
Optional 20.5 R25 / 620/70 R26
STEERING
Servo-assisted steering LOAD SENSING system with separated pump.
Total steering angle 80°
Inner tires turning radius 11’3.83”
External tires turning radius 20’2.13”
External bucket turning radius 22’7.65”
AXLES
Two heavy duty ZF axles with planetary final drivers in each wheel. Rigid drive axle on front chassis section. Oscillation drive axle on rear chassis section up to a total angle of 20°. Transfer gear box transferring movement directly to the rear and to the front axle via a transmission shaft. Self-locking limited slip differential on front and rear axle.
BRAKES Service: hydraulic multi-disc oil brake on each wheel. Parking: hydraulic negative disc brake actuated by electric control and automatically when the machine is turned off.
HYDRAULIC SYSTEM
Single variable displacement piston pump with power control “PCS” for the loader, second gear pump for the steering circuit. Selector switch to control arm movement speed. Modular 2-element control valve. Double acting hydraulic cylinders. Hydraulic oil cooling radiator with fan having a double speed of rotation. Full-flow oil filter on the leakage pipe. Single servolever-arm-control with 4-position lifting system and with 3-position bucket system.
Max flow gpm 68.68
Loader relief valve pressure bar 4,061
Steering relief valve pressure bar 3,046
Lift cylinder in 5.51”x29.53”
Bucket cylinder in 6.3”x18.9”
SERVICES CAPACITIES
Engine gal 4.09
Front axle gal 9.25
Rear axle gal 9.25
Gear box gal 1.59
Hydraulic circuit gal 58.65
Fuel gal 70.8
Water cooling gal 7.93
NOISE LEVEL
ISO 639 LpA (interior pressure level) 67 dB (A)
2000/14/CE LwA (exterior power level) 103 dB (A)
TECHNICAL FEATURES
Standard bucket capacity yd 3 4.58
Bucket width 9’6.17”
Straight static tipping load lbs 34,172
Full turned 40° tipping load lbs 30,424
Lifting capacity at max. height lbs 28,373
Dump clearance 13’9.35”
Dump height at 43° 10’3.62”
Reach at 43° 3’6.52”
Breakout force lbs 34,436